Every now and then, concrete needs to be cleaned to maintain its beauty and to extend the value of it. Using a pressure washer is one of the easiest ways to perform this certain tedious task and make it less tiresome. It makes the job a lot easier and effortless to do and it helps if you know how to choose good models as well. Before thinking about pressure washing the concrete, you have to prepare the surface. You also need to prepare your necessary materials, including the pressure washer itself. Choose appropriate settings for the pressure washer and carefully select the optimizations that are fit for your cleaning task. These are the steps you need to follow in order to pressure wash your concrete properly.
Choose the best equipments and settings of the pressure washer
For a more optimum cleaning of your concrete, your pressure washer must have a pressure rating of at least 3,000 PSI and at least 15.1 liters flow rate per minute for a more efficient cleaning of the concrete. This is the needed amount of pressure that is ideal for cleaning tougher dirt and debris that has piled up within the walls. Select the best spraying option which is high. Using a 40-inch spray tip is a good idea. There are user-friendly models out there that offer a superior quality, which is also why it is important to choose the best electric pressure washer that will fit your cleaning purposes. The next important thing you should do is to prepare the right amount of cleaning solution. You must have a bucket with detergent ready before proceeding to do further preparations.
Have the concrete surface ready
In order for you to be successful in cleaning a concrete, you must observe a proper preparation. If you tend to do the cleaning by yourself, it will obviously make it easier and faster for you to do the following task if you prepare the area beforehand. You might need to temporarily move the deck furniture or planters if you happen to have any of those around the surface, also consider removing obstacles that may be blocking the concrete. You want to cover plants or garden to avoid contact with the cleaning chemicals and with the pressure of the washer; use tarps or plastic cloth for this. Remember to also protect exposed outlets or electrical wires by covering them with any plastic or taping a waterproof tape over it. Trisodium Phosphate or TSP is well known for its cleaning abilities, you can use that one as a cleaning agent to help ease the process and remove oil and grease. Look for the manufacturer instruction’s guide regarding the application of this product and remember to follow the safety measurements.
Run the spray a test on a spot before starting to clean
Before you start the actual cleaning process, you may want to get used to the power of the equipment just so you know how to control the hose around. Depending on what you may need to do best, you may decrease or increase the level of power of the spray. You can either adjust the it at the nozzle or just adjust your distance from the concrete by holding the wand farther or stepping back.
Maintain fixed pace while cleaning
Make sure to wash firmly and have a steady pace when you clean a concrete. Always wash one section at a time, focus on cleaning the area thoroughly, making sure to free it from the dirt that you are trying to remove before moving on to the next section and don’t move the hose around too much, more importantly not too rapid to make sure that every section is cleaned evenly and there are no visible streaks once the area has dried because that will not look as pleasing and you certainly wouldn’t want your concrete wall to look uneven.
Those are the steps on how to properly clean a concrete with a pressure washer. If followed properly, it is guaranteed to effectively freshen up your dirty concrete walls that must have debris and dirt lurking on it to a now neater looking one. Compared to manual cleaning, cleaning with pressure washers make it ten times more effective and it will require less effort and save time from doing all the scrubbing on your own, You will end up with more energy left than usual when you do the task without an equipment like this. Cleaning concrete walls is just one of the many uses of an electric pressure washer. Whether it’s to clean patio floors, concrete floors or walls, dirty outside appliances, even barbecue grills, or for car washing. It is an ideal equipment to have especially if you want to your outdoor cleaning to be much more easy and effective.
If you are looking for the best pressure washer of 2017 check this website: http://www.thepressurewashr.com/best-pressure-washers-reviews